The FPGA device used on the DLP-HS-FPGA2 is the Xilinx Spartan? 3A: XC3S400A-4FTG256
?
?
?
?
?
?
?
?
Part Number:
System Gates:
Equivalent Logic Cells:
CLB Array :
Rows:
Columns:
Total CLB’s:
Total Slices:
Total Flip Flops:
Total 4-Input LUT’s:
Distributed RAM Bits:
Block RAM Bits:
Dedicated Multipliers:
DCM’s:
XC3S400A-4FTG256C
400,000
8,064
40
24
896
3,584
7,168
7,168
56K
360K
20
4
4.0 ABSOLUTE MAXIMUM RATINGS
Stresses above those listed here may cause permanent damage to the DLP-HS-FPGA:
Operating Temperature : 0-70°C
Voltage on Digital Inputs with Respect to Ground : -0.5V to +4.1 V
Sink/Source Current on Any I/O : 24 mA (using LVTTL as the FPGA I/O standard)
5.0 WARNINGS
?
?
?
Unplug from the host PC and power adapter before connecting to I/O on the DLP-HS-FPGA.
Isolate the bottom of the board from all conductive surfaces.
Observe static precautions to prevent damage to the DLP-HS-FPGA module.
6.0 BITLOADAPP SOFTWARE
Windows software is provided for use with the DLP-HS-FPGA that will load an FPGA configuration
(*.bit) file directly to the SPI Flash device via the USB interface. This application (illustrated below) will
allow the user to erase the Flash, verify the erasure and then program and verify the Flash:
Rev. 1.7 (May 2011)
6
? DLP Design, Inc.